Will CEP Freiberg Be Able to Extrude Your Material?
Generally, the following materials can be processed:
- Powdered metallurgical materials
- Special materials
- Composite materials
To determine the suitability of a certain material for hydrostatic extrusion will always require an individual assessment – if necessary, by appropriate preliminary tests.
Please obtain an initial overview by considering the forming parameters of our machine. Then:
Hydrostatic extrusion press of CEP Freiberg, dimensions available
|6.0 mm to 46.0 mm
|2.4 mm to 28.0 mm
5.0 mm to 30.0 mm
1.0 mm to 10.0 mm
|2.0 mm to 10.0 mm
10.0 mm to 45.0 mm
Which dimensions and/or dimensional ratios are actually possible will always require individual assessment, if necessary, by appropriate preliminary tests.
Hydrostatic extrusion press from CEP Freiberg, technical parameters
|Type||ASEA Quintus, Horizontal extrusion press|
|Maximum pressing force||12 MN|
|Maximum extrusion pressure||1,400 MPa|
|Speed of the pressing stamp||3 mm/s to 18 mm/s|
|Dimensions of the billet, Variant 1||80 mm x 320 mm (Diameter x Length)|
|Dimensions of the billet, Variant 2||90 mm x 360 mm (Diameter x Length)|
|Maximum billet temperature||550°C|
|Heating method for the billet||Inductive|